Web Links - Microsoft

Access Denied Message When an SP5 RRAS Client Access an SP5 RRAS Server with OfferMSCHAP
Description: When you attempt to make a Point-to-Point Tunneling Protocol (PPTP) connection from a Windows NT 4.0 Service Pack 5 (SP5) client to a Windows NT 4.0 SP5 PPTP server running Remote Access Services (RAS) or Routing and Remote Access Services (RRAS),
Added on: 31-Jan-2005 Hits: 645
Rate this Site

Cannot Save RRAS Configuration After Upgrading to Windows NT Service Pack 6
Description: After you upgrade a computer running Windows NT Server and Routing and Remote Access Service (RRAS) to Windows NT Service Pack 6 (SP6), the RRAS configuration can no longer be saved.
Added on: 31-Jan-2005 Hits: 596
Rate this Site

Computer Must Be Restarted for DOD Interface to Reconnect if RRAS Terminated
Description: When the Routing and Remote Access Service (RRAS) process on a Microsoft Windows 2000 Server-based computer shuts down while a demand-dial interface is still connected, the interface does not reconnect after you restart RRAS.
Added on: 31-Jan-2005 Hits: 611
Rate this Site

Enabling VPN in RRAS Causes Connection Issues to Remote Networks
Description: RRAS does not forward packets over the interface that is selected as the "Internet" interface after you enable Virtual Private Network (VPN). Network traffic is forwarded over the VPN connections and the internal LAN connection normally.
Added on: 31-Jan-2005 Hits: 682
Rate this Site

Error 619 or Error 645 Error Message When You Attempt to Connect to RRAS Server
Description: When you attempt to connect to a Microsoft Windows NT 4.0 or Microsoft Windows 2000-based Routing and Remote Access Services (RRAS) server through a dial-up or virtual private network (VPN) connection, you may receive one of the following error...
Added on: 31-Jan-2005 Hits: 749
Rate this Site

File Descriptions for RRAS and the RRAS Service Pack
Description: This article describes the names, sizes, creation dates, and internal version numbers of the files installed with the Routing and Remote Access Service (RRAS) and the RRAS service hotfix pack. (i386 only) This first list below are the original.
Added on: 31-Jan-2005 Hits: 641
Rate this Site

How to change the WINS and the DNS addresses that are assigned by Routing and Remote Access in Windows 2000 and in Windows Server 2003
Description: When a client computer connects to your network either through a dial-up connection or through a virtual private network (VPN) connection, the Routing and Remote Access service assigns the Windows Internet Naming Service (WINS) and the Domain Name System (DNS) IP addresses that must be used by the client. By default, the WINS and the DNS addresses that are assigned to the dial-up client or to the VPN client are the same addresses that are configured for the network adapter in the server that is running Routing and Remote Access.
Added on: 28-Oct-2005 Hits: 504
Rate this Site

How to Configure RRAS DOD to Interoperate with Third-Party Unnumbered Connections
Description: When Dial on Demand (DoD) in Routing and Remote Access Service (RRAS) is used to connect to a terminal server, the terminal server may give out an IP address on the same subnet as the LAN that the RRAS server is connected to.
Added on: 31-Jan-2005 Hits: 591
Rate this Site

How to Implement RIP Over RRAS in Windows 2000
Description: This article discusses how to implement NetWare Router Information Protocol (RIP) over Microsoft Routing and Remote Access Service (RRAS) Dial-on-Demand (DOD) connections in Windows 2000.
Added on: 02-Feb-2005 Hits: 792
Rate this Site

How to Use NAT for Incoming RAS Connections on the Same RRAS Server
Description: This article describes how to enable Internet connectivity for incoming Remote Access Service (RAS) clients that are using Network Address Translation (NAT) on the same server.
Added on: 31-Jan-2005 Hits: 797
Rate this Site


You are not logged in. [ login ]	Search · Downloads · Computing Dictionary · Forums · Top 10